What is happening at your property?
What should a TPO estimate specify so I know what the price includes?
Write down the assembly being proposed
Request the manufacturer and product identification, membrane specification, substrate assumptions, insulation or cover-board work if applicable, and how the proposal addresses relevant edges and penetrations. Keep each item marked included, retained or unknown. These are bid-comparison questions, not an installation recipe or a recommendation that every layer be replaced.
Ask how inspection findings affect quantities
The existing roof may require further qualified evaluation before a complete scope is known. Have the bidder describe what evidence supports the affected area and what work remains provisional. A larger material allowance should be supported by a stated assumption or finding rather than represented as proven damage merely because the building experienced severe weather.
Identify inspection and warranty costs accurately
Ask what contractor inspections, manufacturer involvement or warranty documentation are actually included in this project. Carlisle’s professional guidance illustrates that seams, perimeter details and penetrations receive specific attention; it is not proof that Ease holds a particular manufacturer authorization. Confirm any promised warranty, eligibility and cost with the responsible parties.
Evidence to assemble for this decision
- Exact proposed TPO product and the described assembly components.
- Included, retained and unknown status for existing roof materials.
- Findings or assumptions supporting quantities of affected material.
- Actual inspection, manufacturer and warranty commitments in writing.
Worked example — hypothetical, not an Ease project or quote
Two TPO proposals list different membrane specifications but also different underlying work. The owner separates those differences before comparing totals, then asks which findings support each scope. The resulting discussion is about complete proposals rather than thickness alone. The example does not recommend a membrane, establish roof condition or quote market pricing.
Resources for this checklist: Carlisle: professional roof inspection guide · Florida Building Commission: product approval search
General city/county orientation only. Postal locality does not establish permitting jurisdiction, evacuation instructions or Ease service availability; confirm the property address.
Turn this guide into your assessment checklist
Use this short worksheet to organize what you observed safely. It stays on this page and is not sent to Ease. Copy or download the notes, then paste the relevant details into the existing request form. Do not include policy numbers, financial records or other sensitive documents here.
What should a TPO estimate specify so I know what the price includes?
Record evidence you already have, questions to ask or items still unknown. These prompts reflect this guide’s specific task.
This is a planning worksheet, not a submitted request.
Open the request formIs my area affected?
Use the National Hurricane Center for the storm, the National Weather Service for local hazards, and your county for evacuation and access instructions. The forecast cone is not a boundary of wind, rain or flood impacts.
Current data has not loaded. Use the official links below for current advisories. This panel does not determine warnings at your address.
- National Hurricane Center: current advisories and hazards
- National Weather Service: search your city or ZIP for local weather
- Florida county emergency management directory
Background: NWS hurricane watches, warnings and local products · NWS hurricane forecast and impact explanations
What should an inspection check on my roof type?
The roof covering is one part of a system. Ask about connections, flashing, underlayment or membrane, decking and the areas below. A photo or a storm track alone cannot establish the cause, repairability or full extent of damage.
- Asphalt shingles: Identify affected areas and ask how the covering, underlying materials and adjoining details are evaluated. Detailed assessment guide
- Concrete and clay tile: Ask the evaluator to distinguish tile observations from questions about attachment and the supporting assembly. Detailed assessment guide
- Standing-seam and exposed-fastener metal: Identify the panel system and ask which seams, connections, edges and penetrations need evaluation. Detailed assessment guide
- TPO, PVC and EPDM single-ply: Confirm the membrane identity before discussing repair compatibility, seams, perimeter details and conditions beneath the surface. Detailed assessment guide
- Modified bitumen and built-up roofing: Ask for an assembly-specific assessment of the covering, layers, flashing and drainage-related concerns. Detailed assessment guide
- Slate, shakes, synthetic and other specialty coverings: Identify the product and available installation records; request a qualified assessment before selecting a generic repair. Detailed assessment guide
- Commercial roofs and roof-mounted equipment: Map roof sections, equipment interfaces, occupied spaces and the trades responsible for proposed work. Detailed assessment guide
TPO, PVC and EPDM single-ply
Membrane, seams, perimeter and concealed moisture. The roof system's identity matters when specifying a repair. Ask for separate findings on the membrane, seams, perimeter attachment and wet insulation. A patch proposal should explain why the surrounding assembly remains suitable and how repair compatibility was established.
Ask the inspector:
- Which membrane and attachment system is installed?
- How were wet or damaged underlying materials evaluated?
- Who confirms compatible repair materials?
Useful record: Roof-system records · Located defects · Moisture assessment and limits.
Background: FEMA roof systems: low-slope roofs
Technical references explain common failure mechanisms. Older publications are not current Florida code instructions; the actual product, adopted code and local permitting requirements govern the proposed work.
Look beyond the roof: a room-by-room work plan
One storm can cause several kinds of damage. Record roof-related rain entry, rising water, tree impact and possible plumbing leaks separately. The timing and location help the investigation; they do not prove a cause or determine insurance coverage.
Avoid floodwater and unstable impact areas. Do not touch wet electrical equipment or re-energize exposed systems. Arrange qualified mitigation as soon as access, structure and utilities allow safe work; do not wait for visible mold. Roof-origin water is not automatically clean. Read the full safety and recovery reference
What to include in the assessment request
- Ceilings: Report stains, sagging or falling material. Stay out from beneath a sagging or damaged ceiling. Assessment details
- Drywall and wall cavities: Record the affected wall and timing; ask what evaluation is needed before closing or refinishing it. Assessment details
- Insulation: Ask whether insulation is part of the assessment; do not enter an unsafe attic to check it. Assessment details
- Painting and finish coatings: Treat painting as a finishing decision after the underlying issue and material condition are evaluated. Assessment details
- Flooring and subfloors: Describe changes in the floor and any water exposure; request evaluation before covering or replacing materials. Assessment details
- Cabinets, trim and built-ins: Include affected built-ins in the room record so they are not omitted from the proposed scope. Assessment details
- Electrical systems: Keep clear of water near electrical equipment and damaged wiring. Do not re-energize equipment; seek qualified help. Assessment details
- Plumbing, wells and septic: Report suspected plumbing or water-system concerns separately instead of assuming every leak begins at the roof. Assessment details
- Tree impact and structural damage: Keep away from impacted or unstable areas and downed wires; ask for the appropriate structural and utility response. Assessment details
- Flooding and contaminated water: Avoid floodwater. Report rising-water exposure separately so the appropriate safety, cleanup and evaluation steps can be determined. Assessment details
- Mold and HVAC concerns: Report odors, visible growth or affected HVAC equipment; request appropriate professional evaluation rather than masking the symptoms. Assessment details
- Windows, doors and garage doors: Include broken or displaced openings and water-entry observations in the building assessment. Assessment details
- Fascia, soffits, gutters and downspouts: Photograph changes from a safe location and ask how roof-edge and drainage components fit the repair scope. Assessment details
Assessment details for this guide
Ceilings
Sagging or compromised ceilings need safety assessment before cosmetic work. For stained areas, ask how the source and affected material boundaries will be established.
Record: Room, first-observed time, change since the storm, safe photos.
Work sequence: Safety assessment → source investigation → drying or removal plan → repair.
Background: CDC safety after a hurricane or tropical storm · Florida Hurricane Retrofit Guide: roof and attic water intrusion
Insulation
Include wet insulation in the scope discussion instead of treating it as an automatic part of ceiling painting. Ask what type is present and how surrounding cavities will be evaluated.
Record: Known attic or wall involvement, inspection findings, access limitations.
Work sequence: Professional material assessment → removal/replacement where appropriate → cavity readiness.
Background: EPA water-damaged materials and mold prevention
How roof and interior repairs fit together
Stabilize safely → assess the source and materials → clean, dry or remove as appropriate → verify readiness → reconstruct and close out. Safety, insurer access, permits and qualified trade responsibilities shape the schedule. Detailed recovery sequence
Keep one file with original photos, room observations, inspection findings, emergency-work receipts and each version of the estimate. Ask for separate line items for protection, source repair, cleaning and drying, demolition, reconstruction, permits and disposal. Clarify hidden-damage allowances and how changes require your approval.
Background: Florida DFS hurricane recovery resources · NFIP starting a flood insurance claim
Construction facts and insurance decisions are different
A contractor can explain observed conditions and price repairs. Coverage, deductibles and claim settlement belong with the insurer and appropriately licensed insurance professionals. Ask your insurer promptly what documentation and access it needs; do not rely on a contractor's promise that every item will be paid.
Background: Florida DFS contractor prohibitions · Florida DFS general disaster coverage questions
A 45-day recovery plan is an organizing tool, not an insurance deadline or a reason to postpone safe mitigation. Contact your insurer promptly about requirements and deadlines for your own policy. For extensive flood repairs, ask the local building or floodplain official about substantial-damage review before reconstruction. Florida substantial-damage resources
Questions to resolve before work starts
Can the same patch be used on TPO, PVC, EPDM and modified bitumen?
Do not assume so. Identify the existing roof system and obtain a compatible repair specification. Ask who confirms product compatibility, preparation, attachment and warranty implications before approving a patch or coating.
Background: FEMA roof systems: low-slope roofs
How do I compare a roof repair estimate with a replacement estimate?
Ask each contractor to identify the observed defects, repair boundaries, materials, underlying work, applicable permit requirements and exclusions. Request the reason a narrower repair is or is not feasible. Price comparisons are useful only when the scopes are clear.
Background: Florida DFS choosing a contractor and preventing fraud · FEMA roof systems: sloped roofs
Ask Ease about the whole property
Ease’s primary response area is Central Florida: Tampa and north toward Gainesville, The Villages, Ocala, Orlando and eastern Orlando. This statewide topic guide does not establish service availability at every Florida address. Confirm your property location before scheduling.
Ease Roofing and Ease Construction perform work directly where appropriate and subcontract qualified contractors for work they do not perform themselves. The business says this subcontracted work is arranged under Ease Roofing’s insurance. Ask for the contracting entity, responsible trades, current credentials and applicable insurance evidence in the written agreement. Business insurance does not establish coverage under your property policy.
Include the property location, safe contact details, roof type if known, when damage appeared, affected rooms, any tree or utility hazards and the work you want assessed. You may include roofing, ceilings, drywall, painting, flooring, plumbing, electrical or flood-related concerns in one request; Ease will confirm the appropriate scope and qualified trades.
Submitting a request does not reserve a crew, set a response time, authorize work or guarantee insurance payment. Emergency access restrictions and actual capacity affect scheduling.
Sources and how to use this guide
This educational guide is published for EaseRoofing and connects official safety, building and consumer resources to practical inspection questions. Service area and subcontracting information were provided by the business owner on October 7, 2026. The examples are hypothetical unless explicitly labeled otherwise. This is not an inspection report, a code determination or personalized insurance advice.
Sources were checked October 7, 2026. Older engineering publications provide background; use current official instructions, manufacturer requirements and the local authority for a real project. Weather updates have separate issuance and retrieval times. To report a correction, email EaseRoofing.
- NWS hurricane watches, warnings and local products — official safety guidance
- NWS hurricane forecast and impact explanations — official safety guidance
- Florida Hurricane Retrofit Guide: roof and attic water intrusion — technical background; older guidance
- FEMA roof systems: low-slope roofs — technical background, March 2022
- FEMA roof systems: sloped roofs — technical background, March 2022
- OSHA roof inspection, tarping and repair hazards — worker safety guidance
- CDC safety after a hurricane or tropical storm — official safety guidance
- EPA water-damaged materials and mold prevention — technical material guidance; clean water and contamination differ
- NFIP starting a flood insurance claim — official general insurance education
- Florida DFS hurricane recovery resources — official state consumer guidance
- Florida DFS general disaster coverage questions — official state consumer guidance
- Florida DFS choosing a contractor and preventing fraud — official state consumer guidance
- Florida DFS contractor prohibitions — official state consumer guidance; individual cases need qualified advice
- Florida DBPR hurricane contractor guide — state licensing background; check current individual licenses and local permits
- Florida substantial damage resources — official state floodplain guidance; local official makes determination